SPECIFICATIONS |
MODEL | 7151 | 7152 | 7160 | 7162 |
AC WITHSTAND VOLTAGE |
Output Rating | 5KVAC/12mA |
| Range | Resolution | Accuracy |
Output Voltage, KVAC | 0-5.00 | 0.01 | ± （ 2% of setting + 5V ） |
Output Frequency | 50Hz/60Hz ±100ppm, User Selection |
Output Waveform | Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5 |
Output Regulation | ± (1% of output + 5V), From no load to full load |
SETTINGS |
Hi-Limit AC Current, mA | 0.10 - 12.00 | 0.01 | ± （ 2% of setting + 2counts ） |
Lo-Limit AC Current, mA | 0.00 - 12.00 | 0.01 | ± （ 2% of setting + 2counts ） |
Ramp Time, second | 0.1 - 999.9 | 0.1 | ± （ 0.1% + 0.05sec ） |
Dwell Time, second | 0, 0.2 - 999.9 | 0.1 |
(0=continuous) |
Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) |
DC WITHSTAND VOLTAGE (7120,7122 ONLY) |
Output Rating | 6KVDC/5mA |
Output Voltage, KVDC | 0 - 6.00 | 0.01 | ± （ 2% of setting + 5V ） |
Output Ripple | <5% （ 6KV/5mA at Resistive Load ） |
SETTINGS |
Hi-Limit DC Current, mA | 0.02 - 5.00 | 0.01 | ± （ 2% of setting + 2counts ） |
Lo-Limit DC Current, mA | 0.00 - 5.00 | 0.01 | ± （ 2% of setting + 2counts ） |
Ramp Time, second | 0.1 - 999.9 | 0.1 | ± （ 0.1% + 0.05sec ） |
Dwell Time, second | 0, 0.2 - 999.9 | 0.1 |
(0=continuous) |
Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) |
Discharge Time | < 200 msec |
INSULATION RESISTANCE (7112,7122 ONLY) |
Output Rating | 1KVDC/1000MΩ |
Output Voltage, KVDC | 0.10 - 1.00 | 0.01 | ± （ 2% of setting + 3V ） |
SETTINGS |
Hi-Limit Resistance, MΩ | 0, 1 - 1000 (0=OFF) | 1 | ± （ 3% of setting+2counts ） at > 500VDC |
Lo-Limit Resistance, MΩ | 1 - 1000 | 1 | ± （ 7% of setting +2counts ） at <500VDC |
Delay Time, second | 0, 0.5 - 999.9 | 0.1 | ± （ 0.1% + 0.05sec ） |
(0=continuous) |
MEASUREMENT |
AC/DC Voltage, KV | 0 - 6.00 | 0.01 | ± （ 1.5% of reading + 1count ） |
DC Voltage, KV (IR only) | 0.10 - 1.00 | 0.01 | ± （ 1.5% of reading + 3V ） |
AC Current, mA | 0.10 - 12.00 | 0.01 | ± （ 2% of reading + 2counts ） |
DC Current, mA | 0.02 - 5.00 | 0.01 | ± （ 2% of reading + 2counts ） |
Resistance, MΩ | 1 - 1000 | 0.001 | ± （ 3% of reading+2counts ） at > 500VDC |
(Auto Range) | 0.01 | ± （ 7% of reading +2counts ） at <500VDC |
| 0.1 | |
GENERAL |
Input Voltage AC | 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.15A Fast |
PLC Remote Control | Input : Test , Reset |
Output : Pass , Fail , Processing |
Memory | 5 Sets Store/Recall of each Memory, 4 Test Mode Selectable （ W, I, W ～ I, I ～ W Only 7112, 7122 ） |
Display | 16×2 LCD with back light |
Key Lock | To prevent unauthorized alteration of the test Parameters |
Calibration | Build-in software and external calibrated meters |
Environment | 0-40℃, 20-80%RH |
Dimension/Net Weight | 280mm (W)×89mm(H)×370mm(D)/ 9Kg |
STANDARD ACCESSORIES |
Power Cord(10A) | ×1 |
Fuses | ×3 (Including a spare contained in the fuse holder) |
Hipot Test Lead ,1.5m(1101) | ×1 |
Hipot Return Lead ,1.8m(1102) | ×1 |
*product specifications are subject to change without notice. |